5677.01: Mechanical Field of Testing
Standard Version(s): ISO/IEC 17025:2017
Test Technology/Parameter(s)
Parameters
Test Method(s)/Standards:
Environmental – Climatic
Temperature: -70°C to +180°C
Humidity: 5 to 95%
AS/IEC/EN 60068-2-1, 2, 30, 78, 14
- AS/IEC/EN 60068-2-1 Cold Test
- AS/IEC/EN 60068-2-2 Dry Heat
- AS/IEC/EN 60068-2-30 Damp Heat, Cyclic
- AS/IEC/EN 60068-2-78 Damp Heat, Steady
- AS/IEC/EN 60068-2-14 Change of Temperature (except Nc)
IEC/EN 50155
- Clause 13.4.4 Low Temperature
- Clause 13.4.5 Dry Heat
- Clause 13.4.7 Cyclic Damp Heat
- Clause 13.4.13 Equipment Stress Screening
- Clause 13.4.6 Low Temperature Storage
BS EN50125-3
- Clause 4.3 Temperature
- Clause 4.4 Humidity
MIL-STD-810 E, F
- Method 501.4 High Temperature (no solar radiation)
- Method 502.4 Low Temperature
- Method 507.4 Humidity (no solar radiation)
MIL-STD-810 G
- Method 501.5 High Temperature (no solar radiation)
- Method 502.5 Low Temperature
- Method 507.5 Humidity (no solar radiation)
MIL-STD-810 H
- Method 501.7 High Temperature (no solar radiation)
- Method 502.7 Low Temperature
- Method 507.6 Humidity (no solar radiation)
DEF STAN 00-035
- Test CL1 Constant High Temperature – Low
- Humidity, Test CL2 High Temperature – Low Humidity
- Test CL4 Constant Low Temperature Test
- Test CL5 Low Temperature Test
- Test CL6 High Temperature – High Humidity Test
ISTA
- ISTA 2A Test blocks 1, 2
- ISTA 2B Test blocks 1, 2
- ISTA 3A Test blocks 1, 2
- ISTA 3B Test blocks 1, 2
ASTM D4169
Environmental – Neutral Salt Spray/Fog/Mist
5% – Salt Solution pH – 6.5 to 7.2
Temperature -35°C to 40°C
AS/IEC/EN 60068-2-11 Test Ka: Salt Mist
AS/IEC/EN 60068-2-52 Test Kb: Salt Mist
Test CN2 Corrosive Atmosphere
Environmental – Altitude/Low Pressure
Up to 21,000m (70,000 ft)
3 kPa (Absolute)
ASTM D6653 (Low Pressure)
AS/IEC/EN 60068-2-13 Low Air Pressure/Altitude
Environmental-Mechanical – This scope meets A2LA P112 – Flexible Scope Policy:
Test Technology/Parameter(s)
Parameters
Test Method(s)/Standards:
Vibration, Shock and Drop
Vibration:
Frequency range: 1 to 2000Hz
Max Force: 60kN
Max Displacement: 150mm pk-pk
Shock:
Max Acceleration: 600g at 2ms pulse duration Max load weight: 700kg
Drop:
Max 1.5m height, 120kg
IEC/EN/AS 60068-2-6,-27,-29,-32,-64,-31
- IEC/EN/AS 60068-2-6 Vibration
- IEC/EN/AS 60068-2-27 Shock
- IEC/EN/AS 60068-2-29 Bump
- IEC/EN/AS 60068-2-32 Free Fall (procedure 1)
- IEC/EN/AS 60068-2-64 Vibration
- IEC/EN/AS 60068-2-31 Drop and Topple
MIL-STD-810E, F
- Method 514.5 Vibration, Method 516.5 Shock (except VII and VIII)
MIL-STD-810G
- Method 514.6 Vibration
- Method 516.6 Shock (except VII and VIII)
MIL-STD-810H
- Method 514.8 Vibration, Method 516.8 Shock (except VII and VIII)
MIL-STD-167-1A, Type I
ISTA
- ISTA 2A Test blocks 4, 5, 6 Vibration and Shock
- ISTA 2B Test blocks 3, 4, 5, 6, 7 Vibration and Shock
- ISTA 3A Test blocks 3, 4, 5, 6, 7, 8, 9 Vibration and Shock
- ISTA 3B Test blocks 2, 3, 4, 6, 7, 8 Vibration and Shock (excluding pallet and skid Load)
DEF-STAN-0035, Part 3
- Chapter 2-01, Test M1 – General Purpose Vibration
- Chapter 2-03, Test M3 Classical and Sine Waveform Shock
- Chapter 2-04, Test M4 Drop, Topple and Roll Test
- Chapter 2-05, Test M5 – Impact
- Chapter 2-12, Test M12 – Bump
BS EN 50125-3
- Clause 4.13.1 Vibration, Clause 4.13.2 Shock
IEC/EN 50155
- Clause 13.4.11 Vibration and Shock
IEC 61373
- Railway application – Rolling stock
Equipment – Shock and Vibration Tests
- ASTM D4169
- ASTM D5276 (Handling/Drop)
- ASTM D4728 (Stacked & Vehicle Vibration)
- ASTM D999 (Loose Load Vibration)
- ASTM D6344 (Concentrated Impact)
